Game Trailer Natural Miscarriage Windows Office Database Application Server Graphics Mobile

 Windows Phone

# Windows Phone 7 Game Development : The World of 3D Graphics - Perspective Projection

7/3/2011 3:41:50 PM
The vast majority of 3D games use a perspective projection to display their graphics. Just as in the real world, this projection simulates the application of perspective to objects rendered within the game, so that objects that are farther away appear smaller than objects that are closer.

In addition to this obvious size effect, the more subtle effects of perspective are picked up intuitively by the brain and add a substantial feeling of depth to the rendered scene. The sides of a cube will very slightly narrow due to the effects of perspective as they increase in distance from the viewer, allowing the brain to automatically determine the exact position in which the cube is situated.

#### 1. The Viewing Frustum

When we use a perspective projection in XNA, we create as part of the Effect object initialization a three-dimensional volume known as a viewing frustum. The shape of the frustum is that of a rectangular cone with its tip cut off. A demonstration of such a frustum is shown in Figure 1.

##### Figure 1. A diagram showing a 3D viewing frustum

The frustum can be visualized in the real world by imagining yourself looking through a window. Outside the window you can see the ground and various objects. The farther away into the distance you look, the wider the area that you can see. Objects that are too far to the side, above, or below will be hidden by the window frame.

Objects that fall inside the volume described by the frustum are visible to the camera (and would be visible through the window). Objects that fall outside the frustum volumes are hidden from the camera (and would not be able to be seen through the window).

The near and far clip planes are also taken into account when deciding whether objects are visible. Objects nearer to the camera than the near clip plane are deemed to be too close and are excluded from rendering. Similarly, objects farther than the far clip plane are too far away to be seen and are once again excluded.

NOTE

When we specify an object's z position (its distance into the screen), the negative z axis represents movement away from the player and into the screen: as an object's z coordinate decreases, so it moves farther away. When we specify the distance of the near and far clip planes, however, they are specified purely as distances from the camera and are therefore positive values.

When XNA transforms the objects that fall inside the frustum from the 3D space in which we have defined our world into the 2D space that is actually presented on the screen, it takes into account how much of the width and height of the frustum is filled by any particular object. An object will occupy a greater proportion of the frustum when it is positioned toward the near clip plane than it will at the far clip plane (see Figures 2 and 3). Figure 2 shows two identically sized objects within the viewing frustum. Figure 3 shows the same scene after the perspective projection has taken place to transform the scene into two dimensions for display on the screen. Note that the object at the near clip plane appears substantially larger than the one at the far clip plane.

##### Figure 3. The same two objects after perspective projection into 2D

In addition to the clip planes, the frustum is defined by two more pieces of information: the viewing angle and the aspect ratio.

The viewing angle defines the angle, in degrees, between the camera and the upper edge of the frustum (the angle on the y axis). Changing this angle will make the overall shape of the frustum expand or compress, causing the apparent reduction in size of objects farther away to be increased or decreased.

Figure 4 shows two viewing frustums from the side: the first with a viewing angle of 45 degrees; the second with 22.5 degrees. The distance of the near and far clip planes is the same in both cases.

##### Figure 4. Two viewing frustums, one with a 45-degree viewing angle (left) and one with a 22.5-degree angle (right)

Consider how objects that fall into these two frustums will be projected. On the left, objects can deviate further from the center of the frustum and still be seen by the camera. Objects that are farther away will become rapidly smaller as their size relative to the extent of the frustum becomes less and less. On the right, objects farther from the center will leave the frustum more quickly and so will disappear off the edge of the screen. Distant objects will appear larger than with the first frustum as they occupy a greater proportion of the frustum's area.

Exactly what you should specify for the viewing angle will potentially vary from one game to the next. An angle of 45 degrees is usually a safe value. Setting the angle too low can make it appear that everything is closer to the player than it really is, which can result in the game feeling uncomfortable to play.

 Some interesting effects can be achieved by varying the viewing angle at strategic times within the game. For example, you could provide a transition between two scenes by rapidly decreasing the viewing angle down to zero, switching the scene, and then increasing the angle back to its original value. This process will cause everything in the center of the screen to appear to zoom toward the player and then zoom back again after the scene change. "Slow-motion" effects can often be accentuated by slightly reducing the viewing angle while they are active.

The second piece of information that the viewing frustum requires is the aspect ratio, which is calculated by dividing the display width by its height. The aspect ratio allows the viewing angle on the x axis to be calculated by XNA in response to the explicit angle that we provided for the y axis. The aspect ratio, together with the viewing angle and the distance of the clip planes, provides everything that is needed to fully describe the frustum.

#### 2. Defining the Viewing Frustum in XNA

XNA actually performs the perspective transformation with the use of another matrix. Listing 1 is present to set up the default projection matrix.

##### Example 1. Creating the viewing frustum matrix
 `// Calculate the screen aspect ratiofloat aspectRatio = (float)GraphicsDevice.Viewport.Width / GraphicsDevice.Viewport.Height;// Create a projection matrixMatrix projection = Matrix.CreatePerspectiveFieldOfView(MathHelper.ToRadians(45), aspectRatio, 0.1f, 1000.0f); `

You should be able to spot all the information that we have discussed as being required for the viewing frustum. The work of generating the projection matrix is performed by the static Matrix.CreatePerspectiveFieldOfView function. The parameters that it expects to be passed are as follows, in the following order:

• fieldOfView: the viewing angle for the projection

• aspectRatio: the aspect ratio of the display width/height

• nearPlaneDistance: the near clipping plane distance

• farPlaneDistance: the far clipping plane distance

In Listing 1, a viewing angle of 45 degrees is specified, along with the aspect ratio calculated from the game's ViewPort, and near and far clipping planes of 0.1 and 1000, respectively.

When rendering, XNA first calculates the positions of all the object vertices in 3D space and then uses the projection matrix to transform them into 2D coordinates to display on the screen.

If you want to change the viewing angle (or any of the other properties of the frustum), you can simply set a new projection matrix into the effect's Projection property before rendering your objects.

The Perspective example project in this article's accompanying download shows how objects move when a perspective projection is applied. The code is very simple; it creates a number of objects with random x, y, and z coordinates. Each time the objects update, they add to their PositionZ value, moving them closer to the screen. When they get to a value of 0, they add 100 to move them back into the distance. A screenshot from the demo can be seen in Figure 5.

##### Figure 5. The Perspective project showing same-sized objects at different distances
Other -----------------

 Video tutorials

 Top 10

 Popular tags

Video Tutorail Microsoft Access Microsoft Excel Microsoft OneNote Microsoft PowerPoint Microsoft Project Microsoft Visio Microsoft Word Active Directory Biztalk Exchange Server Microsoft LynC Server Microsoft Dynamic Sharepoint Sql Server Windows Server 2008 Windows Server 2012 Windows 7 Windows 8 Adobe Indesign Adobe Flash Professional Dreamweaver Adobe Illustrator Adobe After Effects Adobe Photoshop Adobe Fireworks Adobe Flash Catalyst Corel Painter X CorelDRAW X5 CorelDraw 10 QuarkXPress 8 windows Phone 7 windows Phone 8 BlackBerry Android Ipad Iphone iOS
 Video Channel Windows Office Database Application Server